Concept

The demands from clients have often contradicted engineering possibilities. However, once the targets became clear, SHIBUYA have made every effort to knuckle down and achieve them.
The keyword is “NO COMPROMISE” believing that we can overcome the difficulties without sacrificing anything.

-High durability with Light weight.
Utilizing advanced molding technology, pressurized die-casting and plastic injection reduced external parts' weight. To reduce the weight inside the gearbox, holes are drilled in every possible gear, the slip discs for the clutch are relocated at the recess of a gear, and the spindle shaft has a hollow structure. We have achieved these weight reductions without sacrificing any durability. The reason we can perform these tasks is because we have more than 40 years of experience making diamond core drilling machines. We know which part we can apply weight reduction without sacrificing durability.

-High durability with Light weight.-High power from Small-sized motor.-Less noise with High cooling capacity.
-High durability with Light weight.-High power from Small-sized motor.-Less noise with High cooling capacity.
Hybrid Column A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.

Hybrid Column

A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.

Hybrid Column A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.

2 & 4 Sided Rollers
on the Carriage Block

The motor's carriage block runs on durable steel rollers as opposed to the friction plates used in the old models. Reduce drag, abrasion and wear on the carriage block and column while benefiting from smoother feeds and higher rigidity. The picture is TS-603 4-sided rollers. The other models use 2-sided rollers system.

2 & 4 Sided Rollers on the Carriage Block

feauture

The motor ventilation system
The motor ventilation system is designed to prevent water from flowing inside the motor with effective air cooling capacity.
The motor ventilation system
The water inlet valve swivels 360˚ to allow easy water hose connection even in the tightest work places.
The motor ventilation system
Move the feed handle on right or left side with ease to accommodate different working conditions. No tools necessary.
The motor ventilation system
The circuit protector is conveniently located on the drill and features motor overload protection.
The motor ventilation system
The water ring and storable spring-tension water ring clamps as standard accessory for TS-092/132/182/252.
The motor ventilation system

PRCD cuts off the electricity when it detects electric leakage. (Standard feature for 220-240V machine only.)

Regional Differences

Water Cock:

Left one is mainly used in Asian countries.
Right one is mainly used in Europe, America and Oceania area.

Water Cock

Drill Motor Spindle Thread:

A-Rod: Left one is mainly used in Asian countries.
UNC 1 -1/4": Right one is mainly used in Europe, America and Oceania area.

Drill Motor Spindle Thread

product

Concept

The demands from clients have often contradicted with engineering possibilities. However, once the targets became clear, SHIBUYA have made every effort to knuckle down to achieve them.
The keyword is “NO COMPROMISE” believing that we can overcome the difficulties without sacrificing anything.

-High durability with Light weight.-Hign power from Small-sized motor.-Less noise with High cooling capacity.
-High durability with Light weight.-Hign power from Small-sized motor.-Less noise with High cooling capacity.

-High durability with Light weight.
Utilizing advanced molding technology, pressurized die-casting and plastic injection reduced external parts' weight. To reduce the weight inside the gearbox, holes are drilled in every possible gear, the slip discs for the clutch are relocated at the recess of a gear, and the spindle shaft has hollow structure. We have achieved these weight reductions without sacrificing any durability. The reason we can perform these tasks is because we have more than 40 years of experience making diamond core drilling machines. We know which part we can apply weight reduction without sacrificing durability.

Hybrid Column A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.
Hybrid Column A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.

Hybrid Column

A hybrid extruded steel outer shell combined with an aluminum core to make the column high rigid, durable and lightweight. This feature is standard on models TS-132, TS-162, TS-402, TS-403, and TS-603 with fixed base.

2 & 4 Sided Rollers
on the Carriage Block

The motor's carriage block runs on durable steel rollers as opposed to the friction plates used in the old models. Reduce drag, abrasion and wear on the carriage block and column while benefiting from smoother feeds and higher rigidity. The picture is TS-603 4-sided rollers. The other models use 2-sided rollers system.

2 & 4 Sided Rollers on the Carriage Block

feauture

The motor ventilation system is designed to prevent water from flowing inside the motor with effective air cooling capacity.
The motor ventilation system
The water inlet valve swivels 360˚ to allow easy water hose connection even in the tightest work places.
The motor ventilation system
Move the feed handle on right or left side with ease to accommodate different working conditions. No tools necessary.
The motor ventilation system
The circuit protector is conveniently located on the drill and features motor overload protection.
The motor ventilation system
The water ring and storable spring-tension water ring clamps as standard accessory for TS-092/132/182/252.
The motor ventilation system

PRCD cuts off the electricity when it detects electric leakage. (Standard feature for 220-240V machine only.)

The motor ventilation system

Regional Differences

Water Cock:

Left one is mainly used in Asian countries.
Right one is mainly used in Europe, America and Oceania area.

Water Cock

Drill Motor Spindle Thread:

A-Rod: Left one is mainly used in Asian countries.
UNC 1 -1/4": Right one is mainly used in Europe, America and Oceania area.

Drill Motor Spindle Thread

product